You can return both classic bikes and ebikes to any station with an open dock – you don't have to bring it back to the station where you picked it up.  Use the slider on the top left of the map screen to toggle between available docks. 

To dock your bike, tap on a station to see the exact number of bikes and docks available. Once you’ve found an open dock, line up the triangle located at the front of the bike with the dock, then insert your bike gently but firmly, holding the bike in place for at least 5 seconds. Please don’t slam it! When the light on the dock turns green, your bike has been properly locked. Just keep in mind, it can sometimes take a few minutes for a dock to register that your bike was returned.

To lock your ebike, remove the cable lock from the holder and wrap the cable around the bike rack. Then place the pin into the lock. You will hear a beep when the bike is securely locked, with the LED ring turning green and then flashing white. This signifies that your trip has ended.

Always park your bike responsibly. Lock your bike to a public bike rack and always be mindful of others: don’t block sidewalks, pathways, or ADA ramps. Do not lock to railings or private property and never leave your bike locked to itself. Please note that if we detect a violation of the parking standards, we will send you an in-app alert or email and you may be subject to a $25 fine.

Note: If docking your ebike at a station, do not also use the cable lock to lock the ebike to the dock, as this may result in a parking fee. Even if the station appears full, this action will cause the system to register an open dock. Only use the cable lock at approved object listed above.

Please always make sure your bike is docked at a Capital Bikeshare station or locked with the cable lock appropriately when your ride is over; never leave it unattended.